SPEED MAX 300

Compact hand dryer with photocell activation and brushless motor. Stainless steel shell. Locking system with steel screws. Equipped with an on-off switch to turn on the heating element. Motor speed at sensor reading distance adjustable. Vandal-resistant system with automatic shutdown after 60 seconds of continuous operation. Equipped with automatic air heating shut-off system if the ambient temperature exceeds 25° C.
Available colors: White | Anthracite | Polished stainless | Satin stainless

 

  • Air outlet indicator light
  • Automatic or push-button shutdown of the heating element
  • Drying speed
  • HEPA-13 Filter
  • Led UVC
  • Brushless Motor
  • Energy saving
  • Motor adjustment via dimmer
  • Ideal where an absolute filter (HEPA-13) is required to break down bacteria and particles.
  • Perfect where a UVC lamp is required for bacterial abatement.

Additional information

Drive

Sensor

Engine

38000 RPM, 550 W brushless

Voltage (-1)

110-120 V; 60 Hz; 8.3 A; 1000 W

Voltage (-2)

220-240 V; 50/60 Hz; 4.3 A; 1000 W

Air temperature

40°C; room temperature 25°C

Air speed

100 m/s; 360 km/h

Air flow rate

130 m3/h

Drying time

10-12 seconds

Sensor range

5-15 cm

Filter

Hepa-13

Sanitizing device

LED UVC

Degrees of protection

IP 23

Insulation class

Class I

Max consumption at drying

0.0033 KW/h
0.0018 KW/h (resistance off)

Rated min-max consumption

550 W -1000 W

Noisiness [a 1 m]

74 dB

Lid material

Stainless steel

Gross weight

4.0 kg

Net weight

3.5 kg

Hepa-13 Filter

Absolute filter. Efficiency of filtering harmful particles by ensuring a reduction in bacterial loads.

UVC lamp

Direct germicidal action on cell DNA of bacteria, viruses, microorganisms.

Brushless Motor

Performing, no brushes to replace!

Energy consumption

Through adjusting the motor speed, it is possible:
– Change the noise level;
– Contain electricity consumption considerably.
(without altering the user's comfort of use).

Anti-vandalism

Automatic shutdown after 60 seconds of continuous operation.

**On/Off switch

The Switch (on-off) for switching the resistor on or off allows:
– Significantly reduce electricity consumption (switch position off);
– switch on the heater power supply (in case high air temperature is desired or if installation is planned in unattended open bathrooms.

Indicator light in air outlet

The semicircular blue LED light guides the user to the airflow.